|
|
|
EZ Level: Set (For a 24" Base)
Includes: (2) EZ-Levels, (1) extension rod, & all hardware necessary for either the "right or left" side of any 24" base cabinet. ***Note: We have done the measuring for you... This set measures 20 3/4" long to accommodate for the toe kick inset.***
|
|
|
|
|
|
|
|
|
EZ Level: Set (For a 21" Vanity)
Includes: (2) EZ-Levels, (1) extension rod, & all hardware necessary for either the "right or left" side of any 21" Base cabinet. ***Note: We have done the measuring for you... This set measures 17 3/4" long to accommodate for the toe kick inset.***
|
|
|
|
|
|
|
|
|
EZ Level: Set (For a 18" Vanity)
Includes: (2) EZ-Levels, (1) extension rod, & all hardware necessary for either the "right or left" side of any 18" base cabinet. ***Note: We have done the measuring for you... This set measures 14 3/4" long to accommodate for the toe kick inset.***
|
|
|
|
|
|
|
|
|
EZ Level: Set (For a 15" or less cabient) "Single Unit"
Includes: (1) EZ-Level & all hardware necessary for either the "right or left" side of any 15" (or less) base cabinet. ***Note: We have done the measuring for you... This is a single leveling unit sufficient for any cabinet 15" or less in depth***
|
|
|
|
|
|
|
|
|
Extra #2 Square bit
You need a #2 square driver to adjust the EZ-Level system. ***We include (1) for every EZ-Level order.*** But... "IF" you need an additional driver we have included it here.
|
|
|
|
|
|
|
|
|
7/8" - 1 3/8" Boring Bit
This drill bit is 6X's Faster than other bits!
Paddle bits are very slow and a bit messy!
***A MUST HAVE if time & clean cuts are important!****
|
|
|
|
|
|
|
|
|
BOSCH GLL2-10 Cross Line Laser
We are now using the BOSCH cross line laser. We have used numerous lasers over the years, but this small, affordable laser has been the best of all! Light weight and compact it goes any where and mounts to any tripod.
|
|
|
|
|
|
|
|
|
Laser Tripod: A MUST HAVE if you entend to use a laser.
The best way to use a laser level is to use it in conjunction with one of these! Its three-way pan head lets you follow the action left, right, up or down. The quick-release function lets you go mobile in a few seconds. It features expandable height from 21.5 to 56 inches. ***(Shipping on this item is expensive because of the size... $25! You can purchase a tripod locally and save the money, but for your convience I've included it anyway).***
|
|
|
|
|
|
|
|
|
Magic Stud Finder
Simply the best stud finder we have ever used! It ALWAYS works! It NEVER finds bogus locations like the other!
|
|
|
|
|
|
|
|
|
Crown-Cut
Crown can be difficult. Worse... One wrong cut can cost you big time! This is the easiest system I know of. It's quick, easy and inexpensive! (My kind of tool)!
|
|
|
|
|
|
|
|
|
Super Clamps
There are dozens of clamps available at the big box stores. These clamps simply make your installation a lot easier. They are not necessary... but they are better and faster than the others.
|
|
|
|
|
|
|
|
|
Dewalt Rapid Load set
There are numerous boring bits available. I like these because the last! The (3) sets are a little pricey but I always find a good use for them. ***(Note: For most cabinet installations... you will only need the #10 bit. This is the one I use to drill/screw cabinet styles together)
|
|
|
|
|
|
|
|
|
Dewalt Rapid Load "single" #10 Counersink
FINALLY! I have searched for over a year trying to find a line so we can purchase the #10 bit individually! Don't get me wrong... I need all three sizes because I'm in the trade. BUT... for kitchens I only use the #10. (This is the bit you will need to screw your cabinet styles together)
|
|
|
|
|
|
|
|
|
DeckMate Screws 2-1/2"
We have been using DeckMate screws for years now. I wouldn't even consider using anything else.
1). They're a nice natural maple wood color
2). The bit doesn't slip
3). The tapered heads tuck in nicely and look sharp.
3). The coating causes them to glide in easily and since they are made for decking... you can beet they are VERY STRONG.
Use these to screw styles together (framed cabinet only) and to mount cabinets to the wall.
A bit more expensive than regular screws, but worth every penny.
1LB Box (about 80 screws) will do for "most" kitchen installs.
|
|
|
|
|
|
|
|
|
Special order item 03.04.10
This is fore special order items only.
|
|
|
|
|
|
|
|
|
Deck Mate Screws 1- LB
We have been using these screws or over 10 years and I still believe that they are the absolute best to hang and attache kitchen cabinets. Maple color blends well too.
|
|
|
|
|
|
